Jkongmotor bldc motor driver bld-300b BLD120 / 300 / 480 / 750 / 1100 / 2200W BLDC Stepper Motor Driver/DC Motor Driver/Driving Motor /AC Servo Motor Driver
1. A BLDC motor controller regulates the speed and torque of the motor; it can also start, stop, and reverse its rotation..
2. There are three classifications of the BLDC motor: single-phase, two-phase and three-phase. This discussion assumes that the stator for each type has the same number of windings. The single-phase and three-phase motors are the most widely used..
3. A brushless motor needs a motor controller to switch the power to the coils at the right times to keep the motor turning. There's no way to make the motor do anything useful without a brushless motor controller.
4. Jkongmotor recommends using a motor driver rated up to 1.2 × the maximum voltage for well-regulated supplies and low-power motors, and 1.5 to 2 times for high-power motors and battery systems..
| Motor Main Characteristics: |
| Brand: |
Jkongmotor |
Model: |
JKBLD70 |
| Driver Type: |
BLDC Motor Driver |
Power Supply: |
DC |
| Support Motor: |
Brushless dc motor less of 70w |
Output Current: |
0.05A-3A |
| Input Voltage: |
12v-24 VDC |
Hall Sensor Voltage: |
4.5V-6.5V |
| Suitable Motor Speed: |
0-10000rpm |
External Potentiometer: |
10kΩ |
| JKBLD70 is a high performance, codt-effective 3 phase BLDC motor driver which can provide power output 70W max. The design is based on advanced current control technology and feature high torque, low noise, low vibration, over current protect, over load protection. |
| Driver Main Characteristics: |
| Brand: |
Jkongmotor |
Model: |
JKBLD120 |
| Driver Type: |
BLDC Motor Driver |
Power Supply: |
DC |
| Output Current: |
8A(Rated) |
Input Voltage: |
12v-30 VDC |
| Hall Sensor Voltage: |
4.5V-6.5V |
External Potentiometer: |
10kΩ |
| Support Motor: |
Brushless dc motor less of 120w |
| JKBLD120 brushless dc driver is suit the following 3 phase since wavve power is 120W brushless dc motor speed regulation, can provide an external potentiometer control, external analog control, PC (such as PLC, SCM) PWM speed regulation, and other functions. At the same time the driver have large starting torque, quick start and brake, and positive & negative switching, combination of manual and automatic control. |
| Driver Main Characteristics: |
| Brand: |
Jkongmotor |
Model: |
JKBLD300 |
| Driver Type: |
BLDC Motor Driver |
Power Supply: |
DC |
| Output Current: |
15A ~35A |
Input Voltage: |
18V~50VDC |
| Suitable Motor Speed: |
0-20000Rpm |
Hall Sensor Voltage: |
4.5V-5.5V |
| Support Motor: |
Brushless dc motor less of 300w |
| JKBLD300 brushless dc driver is suit the following three-phase sine wave power is 300W brushless dc motor speed regulation, can provide an external potentiometer control, external analog voltage control, PC (such as PLC, SCM) PWM speed regulation, and other functions. At the same time the drive have large starting torque, quick start and brake, and positive &negative switching, combination of manual and automatic control. |
| Driver Main Characteristics: |
| Brand: |
Jkongmotor |
Model: |
JKBLD480 |
| Driver Type: |
BLDC Motor Driver |
Power Supply: |
DC |
| Output Current: |
10A(Rated) |
Input Voltage: |
18V~50VDC |
| Insulation resistance: |
General temperature>500MΩ |
Size: |
118x75.5x34mm |
| Support Motor: |
Brushless dc motor less of 480w |
| JKBLD480 brushless DC motor driver is our company's latest high-tech product for the field of medium power motor drive. This product uses a large-scale integrated circuit to replace the original hardware. It has higher anti-jamming and fast response ability. It is suitable for all the three-phase brushless DC motors with low voltage DC18V-50V(boards show DC24V-48V) and peak current below 10A. Even if working with large current, it is still in low temperature. It is widely used in knitting equipment, medical equipment, food packaging machinery, power tools and a series of areas of electrical automation and control. |
| Driver Main Characteristics: |
| Brand: |
Jkongmotor |
Model: |
JKBLD750 |
| Driver Type: |
BLDC Motor Driver |
Power Supply: |
DC |
| Output Current: |
25A ~ 45A |
Input Voltage: |
18 ~ 50VDC |
| Suitable Motor Speed: |
0-20000Rpm |
Size: |
151x97x48mm |
| Hall Sensor Voltage: |
4.5V-5.5V |
External Potentiometer: |
10kΩ |
| Support Motor: |
Brushless dc motor less of 750w |
| JKBLD750 brushless dc driver is suit the following 3 phase sine wave power and 48VDC 750W brushless dc motor speed regulation, can provide an external potentiometer control, external analog voltage control, PC (such as PLC, SCM) PWM speed regulation, and other functions. At the same time the drive have large starting torque, quick start and brake, and positive & negative switching, combination of manual and automatic control. |
Brushless Dc Motor Kit Stepper Motor with Encoder
Linear Stepper Motor 3 4 Axis Stepper Motor Kits Hollow Shaft Stepper Motor
Bldc Motor Brushed Dc Motor Hybrid Stepper Motor
Changzhou Jkongmotor Co., Ltd was a high technology industry zone in changzhou, china. Our products used in many kinds of machines, such as 3d printer CNC machine, medical equipment, weaving printing equipments and so on.
JKONGMOTOR warmly welcome 'OEM' & 'ODM' cooperations and other companies to establish long-term cooperation with us.
Company spirit of sincere and good reputation, won the recognition and support of the broad masses of customers, at the same time with the domestic and foreign suppliers close community of interests, the company entered the stage of stage of benign development, laying a solid foundation for the strategic goal of realizing only really the sustainable development of the company.
Equipments Show:
Production Flow:
Package:
Certification:
Audited Supplier 
){kind=link}
){kind=link}