Jkongmotor NEMA 17 23 34 Gear Reducer Geared Stepper Motor for 3D Printer and camera
| Genaral Specification |
| Item |
Specifications |
| Step Angle |
1.8° or 0.9° |
| Temperature Rise |
80ºCmax |
| Ambient Temperature |
-20ºC~+50ºC |
| Insulation Resistance |
100 MΩ Min. ,500VDC |
| Dielectric Strength |
500VAC for 1minute |
| Shaft Radial Play |
0.02Max. (450g-load) |
| Shaft Axial Play |
0.08Max. (450g-load) |
| Max. radial force |
28N (20mm from the flange) |
| Max. axial force |
10N |
1. The magnetic steel is high grade,we usually use the SH level type.
2. The rotor is be coated,reduce burrs,working smoothly,less noise. We test the stepper motor parts step by step.
3. Stator is be test and rotor is be test before assemble.
4. After we assemble the stepper motor, we will do one more test for it, to make sure the quality is good.
JKONGMOTOR stepping motor is a motor that converts electrical pulse signals into corresponding angular displacements or linear displacements. This small stepper motor can be widely used in various fields, such as a 3D printer, stage lighting, laser engraving, textile machinery, medical equipment, automation equipment, etc.
1.8 Degree Stepper Motor Parameters:
| Model No. |
Step Angle |
Motor Length |
Current |
Resistance |
Inductance |
Holding Torque |
# of Leads |
Detent Torque |
Rotor Inertia |
Mass |
| ( °) |
(L)mm |
A |
Ω |
mH |
kg.cm |
No. |
g.cm |
g.cm2 |
Kg |
| JK42HS25-0404 |
1.8 |
25 |
0.4 |
24 |
36 |
1.8 |
4 |
75 |
20 |
0.15 |
| JK42HS28-0504 |
1.8 |
28 |
0.5 |
20 |
21 |
1.5 |
4 |
85 |
24 |
0.22 |
| JK42HS34-1334 |
1.8 |
34 |
1.33 |
2.1 |
2.5 |
2.2 |
4 |
120 |
34 |
0.22 |
| JK42HS34-0406 |
1.8 |
34 |
0.4 |
24 |
15 |
1.6 |
6 |
120 |
34 |
0.22 |
| JK42HS34-0956 |
1.8 |
34 |
0.95 |
4.2 |
2.5 |
1.6 |
6 |
120 |
34 |
0.22 |
| JK42HS40-0406 |
1.8 |
40 |
0.4 |
30 |
30 |
2.6 |
6 |
150 |
54 |
0.28 |
| JK42HS40-1684 |
1.8 |
40 |
1.68 |
1.65 |
3.2 |
3.6 |
4 |
150 |
54 |
0.28 |
| JK42HS40-1206 |
1.8 |
40 |
1.2 |
3 |
2.7 |
2.9 |
6 |
150 |
54 |
0.28 |
| JK42HS48-0406 |
1.8 |
48 |
0.4 |
30 |
25 |
3.1 |
6 |
260 |
68 |
0.35 |
| JK42HS48-1684 |
1.8 |
48 |
1.68 |
1.65 |
2.8 |
4.4 |
4 |
260 |
68 |
0.35 |
| JK42HS48-1206 |
1.8 |
48 |
1.2 |
3.3 |
2.8 |
3.17 |
6 |
260 |
68 |
0.35 |
| JK42HS60-0406 |
1.8 |
60 |
0.4 |
30 |
39 |
6.5 |
6 |
280 |
102 |
0.5 |
| JK42HS60-1704 |
1.8 |
60 |
1.7 |
3 |
6.2 |
7.3 |
4 |
280 |
102 |
0.5 |
| JK42HS60-1206 |
1.8 |
60 |
1.2 |
6 |
7 |
5.6 |
6 |
280 |
102 |
0.5 |
0.9 Degree Stepper Motor Parameters:
| Model No. |
Step Angle |
Motor Length |
Current |
Resistance |
Inductance |
Holding Torque |
# of Leads |
Detent Torque |
Rotor Inertia |
Motor |
| ( °) |
(L)mm |
A |
Ω |
mH |
kg.cm |
No. |
g.cm |
g.cm2 |
Kg |
| JK42HM34-1334 |
0.9 |
34 |
1.33 |
2.1 |
4.2 |
2.2 |
4 |
200 |
35 |
0.22 |
| JK42HM34-0316 |
0.9 |
34 |
0.31 |
38.5 |
33 |
1.58 |
6 |
200 |
35 |
0.22 |
| JK42HM34-0956 |
0.9 |
34 |
0.95 |
4.2 |
4 |
1.58 |
6 |
200 |
35 |
0.22 |
| JK42HM40-1684 |
0.9 |
40 |
1.68 |
1.65 |
3.2 |
3.3 |
4 |
220 |
54 |
0.28 |
| JK42HM40-0406 |
0.9 |
40 |
0.4 |
30 |
30 |
2.59 |
6 |
220 |
54 |
0.28 |
| JK42HM40-1206 |
0.9 |
40 |
1.2 |
3.3 |
3.4 |
2.59 |
6 |
220 |
54 |
0.28 |
| JK42HM48-1684 |
0.9 |
48 |
1.68 |
1.65 |
4.1 |
4.4 |
4 |
250 |
68 |
0.35 |
| JK42HM48-1206 |
0.9 |
48 |
1.2 |
3.3 |
4 |
3.17 |
6 |
250 |
68 |
0.35 |
| JK42HM48-0406 |
0.9 |
48 |
0.4 |
30 |
38 |
3.17 |
6 |
250 |
68 |
0.35 |
| JK42HM60-1684 |
0.9 |
60 |
1.68 |
1.65 |
5 |
5.5 |
4 |
270 |
106 |
0.55 |
Nema 17 HSP Planetary Gearbox Stepper Motor Parameters:
| General Specification |
| Housing Material |
Metal |
| Bearing at Output |
Ball Bearings |
| Max.Radial Load(12mm from flange) |
≤80N |
| Max.Shaft Axial Load |
≤30N |
| Radial Play of Shaft (near to Flange) |
≤0.06mm |
| Axial Play of Shaft |
≤0.3mm |
| Backlash at No-load |
1.5° |
| 42HSP Planetary Gearbox Parameters |
| Reduction ratio |
3.71 |
5.18 |
13.76 |
19.2 |
26.8 |
51 |
71 |
99.5 |
139 |
| Number of gear trains |
1 |
2 |
3 |
| Length(L2): mm |
27.3 |
35 |
42.7 |
| Max.rated torque: kg.cm |
20 |
30 |
40 |
| Short time permissible torque: kg.cm |
40 |
60 |
80 |
| Weight: g |
350 |
450 |
550 |
Nema 17 HSG Planetary Gearbox Stepper Motor Parameters:
| General Specification |
| Housing Material |
Metal |
| Bearing at Output |
Ball Bearings |
| Max.Radial Load(12mm from flange) |
≤20N |
| Max.Shaft Axial Load |
≤15N |
| Radial Play of Shaft (near to Flange) |
≤0.06mm |
| Axial Play of Shaft |
≤0.3mm |
| Backlash at No-load |
1.5° |
| 42HSG Planetary Gearbox Parameters |
| Reduction ratio |
5 |
10 |
15 |
20 |
| Number of gear trains |
1 |
2 |
| (L2)Length: (mm) |
28.5 |
| Peak torque: (kg.cm) |
10 |
| Backlash at Noload: (°) |
4deg |
3deg |
Nema 17 PLE Planetary Gearbox Stepper Motor Parameters:
| PLE42-L1 Electrical Specification: |
| Specification |
PLE42-L1 |
| Model |
PLE42-03 |
PLE42-04 |
PLE42-05 |
PLE42-07 |
PLE42-010 |
| Reduction Ratio |
3:01 |
4:01 |
5:01 |
7:01 |
10:01 |
| Output Torque |
8N.m |
9N.m |
9N.m |
5N.m |
5N.m |
| Fail-stop Torque |
16N.m |
18N.m |
18N.m |
10N.m |
10N.m |
| Suitable Motor |
Φ5-10 / Φ22-2 / F31-M3 |
| Rated Input Speed |
3000min-1 |
| Max Input Speed |
6000min-1 |
| Average Lifespan |
20000h |
| Backlash |
≤15arcmin |
| Efficiency |
0.96 |
| Noise |
≤55dB |
| Work Temperature |
-10°~+90° |
| Degree of Protection |
IP54 |
| Weight |
0.25kg |
| PLE42-L2 Electrical Specification: |
| Specification |
PLE42-L2 |
| Model |
PLE42-012 |
PLE42-015 |
PLE42-016 |
PLE42-020 |
PLE42-025 |
PLE42-028 |
| Reduction Ratio |
12:01 |
15:01 |
16:01 |
20:01 |
25:01:00 |
28:01:00 |
| Output Torque |
10N.m |
10N.m |
12N.m |
12N.m |
10N.m |
10N.m |
| Fail-stop Torque |
20N.m |
20N.m |
24N.m |
24N.m |
20N.m |
20N.m |
| Model |
PLE42-035 |
PLE42-040 |
PLE42-050 |
PLE42-070 |
PLE42-100 |
/ |
| Reduction Ratio |
35:01:00 |
40:01:00 |
50:01:00 |
70:01:00 |
100:01:00 |
/ |
| Output Torque |
10N.m |
10N.m |
10N.m |
10N.m |
10N.m |
/ |
| Fail-stop Torque |
20N.m |
20N.m |
20N.m |
20N.m |
20N.m |
/ |
| Suitable Motor |
Φ5-10 / Φ22-2 / F31-M3 |
| Rated Input Speed |
3000min-1 |
| Max Input Speed |
6000min-1 |
| Average Lifespan |
20000h |
| Backlash |
≤20arcmin |
| Efficiency |
94% |
| Noise |
≤55dB |
| Work Temperature |
-10°~+90° |
| Degree of Protection |
IP54 |
| Weight |
0.35kg |
Jkongmotor Other Hybrid Stepper Motor:
| Motor series |
Phase No. |
Step angle |
Motor length |
Motor size |
Leads No. |
Holding torque |
| Nema 8 |
2 phase |
1.8 degree |
30~42mm |
20x20mm |
4 |
180~300g.cm |
| Nema 11 |
2 phase |
1.8 degree |
32~51mm |
28x28mm |
4 or 6 |
430~1200g.cm |
| Nema 14 |
2 phase |
0.9 or 1.8 degree |
27~42mm |
35x35mm |
4 |
1000~2000g.cm |
| Nema 16 |
2 phase |
1.8 degree |
20~44mm |
39x39mm |
4 or 6 |
650~2800g.cm |
| Nema 17 |
2 phase |
0.9 or 1.8 degree |
25~60mm |
42x42mm |
4 or 6 |
1.5~7.3kg.cm |
| Nema 23 |
2 phase |
0.9 or 1.8 degree |
41~112mm |
57x57mm |
4 or 6 or 8 |
0.39~3.1N.m |
| 3 phase |
1.2 degree |
42~79mm |
57x57mm |
- |
0.45~1.5N.m |
| Nema 24 |
2 phase |
1.8 degree |
56~111mm |
60x60mm |
8 |
1.17~4.5N.m |
| Nema 34 |
2 phase |
1.8 degree |
67~155mm |
86x86mm |
4 or 8 |
3.4~12.2N.m |
| 3 phase |
1.2 degree |
65~150mm |
86x86mm |
- |
2~7N.m |
| Nema 42 |
2 phase |
1.8 degree |
99~201mm |
110x110mm |
4 |
11.2~28N.m |
| 3 phase |
1.2 degree |
134~285mm |
110x110mm |
- |
8~25N.m |
| Nema 52 |
2 phase |
1.8 degree |
173~285mm |
130x130mm |
4 |
13.3~22.5N.m |
| 3 phase |
1.2 degree |
173~285mm |
130x130mm |
- |
13.3~22.5N.m |
| Above only for representative products, products of special request can be made according to the customer request. |
Stepping Motor Customized
Brushless Dc Motor Kit Stepper Motor with Encoder
Linear Stepper Motor 3 4 Axis Stepper Motor Kits Hollow Shaft Stepper Motor
Bldc Motor Brushed Dc Motor Hybrid Stepper Motor
Changzhou Jkongmotor Co., Ltd was a high technology industry zone in changzhou, china. Our products used in many kinds of machines, such as 3d printer CNC machine, medical equipment, weaving printing equipments and so on.
JKONGMOTOR warmly welcome 'OEM' & 'ODM' cooperations and other companies to establish long-term cooperation with us.
Company spirit of sincere and good reputation, won the recognition and support of the broad masses of customers, at the same time with the domestic and foreign suppliers close community of interests, the company entered the stage of stage of benign development, laying a solid foundation for the strategic goal of realizing only really the sustainable development of the company.
Equipments Show:
Production Flow:
Package:
Certification:
Audited Supplier 
){kind=link}
){kind=link}