JKD2060AC 2phase hybrid stepper motor driver for factory price suit for NEMA34
Specification:
1. General introduce
JKD2060AC is a type of 2 phase hybrid stepper motor driver , this driver input voltage is 24~60V AC ,24V~80V DC, suit for current less 6.0A, diameter is 86mm 2 phase hybrid stepper motor .this driver that adopts similar to the Circuit of servo control which enables the motor to run smoothly. It is widely used in CNC machine , robots,cutting machine,packing machine,plotter, engraving machine and so on.
2. Characteristic
*Average current control,2 phase sinusoidal output current drive
*supply voltage from 24VAC~60VAC,24VDC~80VDC
*Opto-isolated signal I/O
*Overvoltage, under voltage,overcurrent,phase short cicuit protection
*14 channels subdivision and automatic idle-current reduction
*8 channels output phase current setting
* Can drive 2 phase and 4phase hybrid stepper motor when phase current less than 6.0A
*mainly for 86mm(NEMA34)2 phase stepper motor
3.Mechanical Specification
Input Voltage 20~60V AC, 24~80V DC
Output current 2.0A~6.0A
Temperature working temperature -10°~45°,stocking temperature ~20°~70°
Humidity Not condensation , no water droplets
Gas Prohibition of combustible gases and conductive dust
Weight 600g
Parameter Min Typical Max Unit
Input Voltage(DC) 24 - 90 VDC
Input Voltage(AC) 20 - 60 VAC
Output current 0 - 7.2 A
Pulse Signal Frequency 0 - 200 KHZ
Logic Signal Current 7 10 16 MA
Drawing: