NEMA23 Closed Loop Motor+Encoder+ Driver+3m Wires

• Application: Universal, Industrial, Household Appliances, Car, Power Tools
• Operating Speed: Constant Speed
• Excitation Mode: Shunt
• Function: Control
• Casing Protection: Closed Type
• Number of Poles: 2
• Model NO.: 57HS82-4204BFED-01
• Structure and Working Principle: Enclosed Loop
• Type: DC Motor
• Certification: ISO9001, CE and RoHS
• Brand: Jkongmotor
• Voltage: 4.62V
• Resistance: 1.1ohm
• Current: 4.2A
• Inductance: 2.5m.H
• Frame Size: 86mm*86mm
• Shaft Length: 25mm
• Key Word: Closed Loop Stepper Motor
• Body Length: 10mm
• Shaft Diameter: 8mm
• Transport Package: Export Carton
• Specification: CE, ROHS and ISO
• Trademark: JKONGMOTOR
• Origin: Changzhou, China
• HS Code: 8501109990
• Production Capacity: 100000PCS/Month

Product Description

NEMA23 closed loop stepper motor+ encoder +3m wires 

Electrical Specification:

 

Phase	2		Comment
Step angle	1.8	deg	1000 lines
Voltage	4.62	v
Current	4.2	A
Resistance	1.1+±10%	Ω
Inductance	2.5+±20%	Mh
Holding torque	22	kg.cm
Insulation class	B
Mass	1.8	kg

 

Drawing:

Wiring Diagram:

Driver HSS57:

1. Instruction

1.1 Overview

   HSS57 is 2 phase nema 23, nema 24 series hybrid stepper servo driver. It adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor. The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor. The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system, Besides that, it also have some function of AC servo motors, but price is just half of AC servo.

 

1.2 Features

1.2.1 Stepper motor closed loop system, never lose step.

1.2.2 Improve motor output torque and working speed.

1.2.3 Automatic current adjustment based on load, lower temperature rising.

1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.

1.2.5 Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration.

1.2.6 No vibration from high speed to zero speed

1.2.7 Drive nema 23, nema 24 series 2.2N.m - 3N.m closed loop stepper motor.

1.2.8 Pulses response frequency can reach 200KHZ

1.2.9 16 kinds microsteps choice, highest 51200microsteps/rev.

1.2.10 Voltage range: DC24V~50V

1.2.11 Over-current, over-voltage and position ultra difference protection function.

 

1.3 Applications

Closed loop stepper system can be applied to all kinds small automatic equipment and

Instruments, such as engraving machine, special industrial sewing machine, stripping machine, marking machine, Dispensing machine, cutting machine, laser phototypesetting, graph plotter, NC machine, automatic, assembly equipment and so on.

 

2.1 Electrical Parameter

Voltage range	DC24~50V
Peak current	Peak 6.0A(current change according to load)
Logic input current	7~20mA
frequency	0~200KHz
Suitable motor	57HSE2N,60HSE3N
Encoder lines	1000
Insulation resistance	>=500MΩ

 

 

 2.2 Environment Parameter

 

Cooling method	Natural or radiator
Operating environment	Operating Occasions	try to avoid dust, oil, corrosion gas
	Operating temprature	0~50ºC
	Operating humidit	40~90%RH
	virbration	5.9m/s²Max
Storage temperature	-20ºC~65ºC
Weight	About 560g